Netgear FS116PEU Fast Ethernet (10/100) Power over Ethernet (PoE) network switch

In stock
SKU
KYC1MF
£80.71 £67.26
 
 
FS116P - ProSafe™ 16 Port Switch (with 8 Power x Power over Ethernet (PoE) Ports)
The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink™.
The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.
More Information
SKU KYC1MF
EAN 0606449041729
Specification
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity16
Basic switching RJ-45 Ethernet ports typeFast Ethernet (10/100)
Copper ethernet cabling technology100BASE-TX,10BASE-T
Networking
Networking standardsIEEE 802.3af,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x
10G supportNo
Data transmission
MAC address table1000 entries
Switching capacity3.2 Gbit/s
Maximum data transfer rate0.1 Gbit/s
Protocols
Data link protocolsEthernet, Fast Ethernet
Design
SafetyCE; CE/LVD EN60950
Performance
Packet buffer memory0.096 MB
Mean time between failures (MTBF)116009 h
Power
Power consumption (typical)80 W
Technical details
Mean time between failures (MTBF)116009 h
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity8
Power over Ethernet (PoE)Yes
Certificates
SafetyCE; CE/LVD EN60950
Electromagnetic emissionsCE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22) Class A, C-Tick
Memory
Packet buffer memory0.096 MB
Operational conditions
Storage temperature (T-T)10 - 70 °C
Storage relative humidity (H-H)95
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Weight840 g
Other features
Latency20 µs for 64-byte frames
Data transfer rate100 Mbit/s
Dimensions (WxDxH)287 x 103 x 27 mm
Power requirements48VDC, 4.5 power output
Electromagnetic emissionsCE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22) Class A, C-Tick
Manufacturer Netgear
PDF Url http://pdfs.icecat.biz/pdf/390170-9905.pdf

Add a review

Your email address will not be published. Required fields are marked *